BELANGRIJK:
Het is belangrijk om eerst het systeem EC (firmware) te updaten naar 1.02.xx.

IMPORTANT
It is necessary to update system's EC firmware to 1.02.xx first.

How to flash EC firmware:
1. Plug in AC adaptor.
2. Run ECFlash.bat under pure DOS to start EC flash procedure, the system will shut down automatically when the procedure is finished.
3. Plug off AC adapter for 5 seconds then plug in AC adapter.
4. Power on system and enter CMOS setup to check EC firmware version.


How to flash whole BIOS ROM that include ME:
2. Enter CMOS setup to disable "Intel Anti-Theft Technology" if the item is available.
3. Enter CMOS setup to check the EC firmware version, if the version is 1.00.xx then it is necessary to update EC firmware at first.
4. Run Meset.exe under pure DOS environment, system will restart automatically.
5. Run flashme.bat under pure DOS, system will shut down automatically.
6. Plug off AC adapter for 5 seconds then plug in AC adapter.
7. Power on system, the system will restart automatically.
8. Enter CMOS setup to check BIOS version and load system default, save changes and reboot.
9. If the original BIOS settings are different from system default, please enter CMOS setup to change BIOS settings before system loads Windows.

DESCRIPTION EC:
1. EC firmware 1.02.08.
2. support both Windows 7 and Windows 8.
3. It is necessary to refer to the instruction of readme_EC.txt to update firmware.

1. EC firmware 1.02.09.
2. Solve “Without BT device the BT LED will be always on in Windows 8” issue.
3. Please follow the instruction of readme_EC.txt to update firmware.

DESCRIPTION BIOS:
1. System BIOS 1.02.17 (can't work with all 1.00.xx EC firmware).
2. Support both Windows 7 and Windows 8.
3. It is necessary to update system's EC firmware to 1.02.xx first.
4. It is necessary to refer to the instruction of readme.txt to update firmware.

1. System BIOS 1.02.20 (can't work with all 1.00.xx EC firmware).
2. Update legacy VBIOS to 2143.
3. Update RT PXE LAN ROM to 2.51.
4. It is necessary to update system's EC firmware to 1.02.xx first.
5. It is necessary to refer to the instruction of readme.txt to update firmware